For the Internet access connect your Astroberry to your home wireless network. Point your browser to or to access Astroberry Server. If you abort the flashing process your system is not going to boot at all.Īfter the first boot, search for 'astroberry' wireless hotspot and connect your PC to it using 'astroberry' for password. The process takes some time and you need to be patient. Make sure it is correct before running the above command! Note: Replace sdX with your microSD card identifier. Sudo dd if=astroberry-server_2.0.4.img of=/dev/sdX bs=8M status=progress You can flash your microSD card (minimum 16GB required) using etcher.io or running below commands in your terminal: If you just copy downloaded file to your microSD card it's not going to work. It's not the same as copying the file to microSD card. If you download the file again and the checksum is incorrect, please let us know.īasic installation of the system requires flashing your microSD card with system image file. If it's not, the file is corrupted and must be downloaded again. See this for checksums for other versions. Sha256sum astroberry-server_2.0.4.img.zip You can verify downloaded file with any SHA256 checksum software available for your system or by running below commands in your terminal:
0 Comments
Leave a Reply. |